d80, d90 and d95 are LG Flow Sense warnings. They mean the dryer’s exhaust path is about 80%, 90% or 95% restricted, so hot, damp air can’t get out. The dryer isn’t broken; the vent needs clearing before drying times return to normal.
Key facts
- Flow Sense codes: d75 = about 75%, d80 = 80%, d90 = 90%, d95 = 95% restriction (LG).
- Lit bars on the Flow Sense icon mean the same thing: restricted exhaust.
- The dryer may stop a cycle to avoid overheating.
- On some LG gas dryers, d80 can also point to low gas supply.
- First checks: lint filter, the duct behind the dryer, and the outside vent hood.
- Crushed, kinked or coiled foil duct is a common cause.
- Long runs with several elbows clog faster and are harder to clear.
- If the code returns after you clean the filter and duct, book a vent cleaning or a dryer check.
What the code is measuring
LG dryers sense how freely air leaves the drum. When lint, a crushed duct or a stuck outdoor flap slows that airflow, the control shows a d-code. The higher the number, the worse the blockage.
| Code / indicator | Restriction | What it usually means |
|---|---|---|
| d75 | About 75% | Vent is starting to clog |
| d80 | About 80% | Clean soon; drying times are climbing |
| d90 | About 90% | Clean before the next load |
| d95 | About 95% | Stop using the dryer until the vent is clear |
| Flow Sense bars lit | Restricted exhaust | Same cause as the d-codes |
Why it happens
- Lint builds up in the duct between cleanings.
- The duct behind the dryer gets crushed when the dryer is pushed back.
- Flexible foil duct sags or is coiled like a spring.
- The outside vent flap is stuck shut, screened over or blocked by a nest.
- The duct run is long or has many bends.
What you can check safely
- Clean the lint filter and its slot.
- Unplug the dryer (on gas models, don’t move it far enough to strain the gas line).
- Pull it out and look for a crushed or kinked duct. Straighten it or replace damaged sections.
- Run the dryer and go outside. You should feel a strong flow of warm air at the vent hood.
- Restart. If the code clears, keep the duct straight and clean the vent once a year.
When to call
Call if the code comes back after these checks, if you can’t reach the duct, or if a gas dryer shows d80 and the vent looks clear. A long or roof-exit vent usually needs a vent cleaning service. If the vent is clear and clothes still take too long, the dryer itself needs a diagnosis.
Related questions:
– Why is my LG dryer not heating?
– Which LG dryer repairs can’t wait?
If the vent is clear and the code won’t go away, LG Repairs can check the dryer. Call (877) 748-5179 or get a quote.
Disclaimer: LG® is a registered trademark of LG Electronics, Inc. LG Repairs is an independent appliance repair service and is not affiliated with, authorized by, or endorsed by LG Electronics. Brand names are used for informational purposes only.
Frequently asked questions
Can I keep using my LG dryer with a d80 code?
You can finish a load, but drying will be slow. Clear the vent soon, before the code climbs to d90 or d95.
How do I reset the d90 code?
Clear the blockage, then restart the dryer. The code clears once airflow is back to normal; it isn’t a fault you reset with buttons.
Does d95 mean the dryer is broken?
No. It means the exhaust is about 95% blocked. Stop using the dryer until the vent is cleared.
Why does my gas LG dryer show d80 with a clean vent?
On some gas models, d80 can mean low gas supply. Have a technician check the gas supply and burner.